The Perfect Setup: SuSE 9.3

[ct2193]

I'm attempting to build a SuSE 9.3 system via the "Perfect Setup" document and I've come into a problem configuring Quotas.

I'm at the part:

-=-=-=-
touch /aquota.user /aquota.group
chmod 600 /aquota.*
mount -o remount /
quotacheck -avugm
quotaon -avug
-=-=-=-

The first time I ran this, quotacheck -avugm returned the message "quotafile was probably truncated".

And the line quotaon -avug returned "quota format not supported in kernel".

I attempted to repeat the entire quota section and the line quotacheck -avugm said nothing more about truncated files. So I assume this part is
ok.

The line quotaon -avug still returns the message about "quota format not supported in kernel". I'm not really sure as to why. I have not loaded anything custom, as everything has been installed per the "Perfect Setup" documentation.

Any suggestions?

-=-

I'm also interested in a "Perfect Setup" specifically for RedHat 9 and/or RedHat Enterprise Linux 4 (RHEL4). Any information on these versions?

[falko]

And the line quotaon -avug returned "quota format not supported in kernel".

Have a look at this thread: http://www.howtoforge.com/forums/showthread.php?t=3083

[ct2193]

I looket at http://www.howtoforge.com/forums/showthread.php?t=3083 and still have problems.

-=-
touch /aquota.user /aquota.group
chmod 600 /aquota.*
mount -o remount /
quotacheck -avug

then i get the message "quotacheck: Cannot remount filesystem mounted on / read-only so counted values might not be right. Please stop all programs writing to filesystem or use -m flag to force checking.

(didn't get this message before)

then I ran

quotaon -avug

and got the message

quotaon: using //aquota.group on /dev/hda2 [/]: No such process
quotaon: Quota format not supported in kernel.
quotaon: using //aquota.user on /dev/hda2 [/]: No such process
quotaon: Quota format not supported in kernel.

-=-
here's my fstab

/dev/hda2 / reiserfs acl,user_xattr,usrquota,grpquota 1 1
/dev/hda1 swap swap pri=42 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
proc /proc proc defaults 0 0
usbfs /proc/bus/usb usbfs noauto 0 0
sysfs /sys sysfs noauto 0 0
/dev/cdrom /media/cdrom subfs noauto,fs=cdfss,ro,procuid,nosuid,nodev,exec,iocha rset=utf8 0 0
/dev/fd0 /media/floppy subfs noauto,fs=floppyfss,procuid,nodev,nosuid,sync 0 0


Not sure what the problem is.

I've redone the entire "Perfect Setup" and the "how-to" dies here again.

[ct2193]

also tried

modprobe quota_v1

FATAL: Could not load /lib/modules/2.6.11.4-20a-default/modules.dep: No such file or directory

modprobe quota_v2

FATAL: Could not load /lib/modules/2.6.11.4-20a-default/modules.dep: No such file or directory

quotaon -avug

quotaon: using //aquota.group on /dev/hda2 [/]: No such process
quotaon: Quota format not supported in kernel.
quotaon: using //aquota.user on /dev/hda2 [/]: No such process
quotaon: Quota format not supported in kernel.

[falko]

here's my fstab

/dev/hda2 / reiserfs acl,user_xattr,usrquota,grpquota 1 1
/dev/hda1 swap swap pri=42 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
proc /proc proc defaults 0 0
usbfs /proc/bus/usb usbfs noauto 0 0
sysfs /sys sysfs noauto 0 0
/dev/cdrom /media/cdrom subfs noauto,fs=cdfss,ro,procuid,nosuid,nodev,exec,iocha rset=utf8 0 0
/dev/fd0 /media/floppy subfs noauto,fs=floppyfss,procuid,nodev,nosuid,sync 0 0

You're using reiserfs. Quota doesn't work on reiserfs - you should have used ext3 instead.

[ct2193]

OK. I reinstalled SuSE 9.3, being sure to use EXT3 (instead of ReiserFS)

This time, running:

touch /aquota.user /aquota.group
chmod 600 /aquota.*
mount -o remount /
quotacheck -avug

Seemingly worked fine. Then I ran:

quotaon -avug

and got the message

quotaon: using //aquota.group on /dev/hda2 [/]: No such process
quotaon: Quota format not supported in kernel.
quotaon: using //aquota.user on /dev/hda2 [/]: No such process
quotaon: Quota format not supported in kernel.

Don't know what the problem is. I tried "modprobe quota_v1" and v2. Both say "could not load /lib/modules/2.6.11.4-20a-default/modules.dep No such file or folder"

I rechecked all the previous steps from the how-to document. Everything appears to have been completed as well as properly spelled.

Any more ideas?

[falko]

Please run
echo quota_v1 >> /etc/modules
echo quota_v2 >> /etc/modules and reboot the system. Does it work then?

[ct2193]

OK. I'm now to the postconf part of Postfix. Thus far (with much thanks) I've gotten here with no further problems. I would like clairification as to which parts are your "put your data here" and which parts are system phrases / config strings. The section I am in question of is below.

-=-

postconf -e 'mydomain = example.com'
postconf -e 'myhostname = server1.$mydomain'
postconf -e 'smtpd_sasl_local_domain ='
postconf -e 'smtpd_sasl_auth_enable = yes'
postconf -e 'smtpd_sasl_security_options = noanonymous'
postconf -e 'broken_sasl_auth_clients = yes'
postconf -e 'smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,check_ relay_domains'
postconf -e 'inet_interfaces = all'
postconf -e 'alias_maps = hash:/etc/aliases'
postconf -e 'smtpd_tls_auth_only = no'
postconf -e 'smtp_use_tls = yes'
postconf -e 'smtpd_use_tls = yes'
postconf -e 'smtp_tls_note_starttls_offer = yes'
postconf -e 'smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key'
postconf -e 'smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt'
postconf -e 'smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem'
postconf -e 'smtpd_tls_loglevel = 1'
postconf -e 'smtpd_tls_received_header = yes'
postconf -e 'smtpd_tls_session_cache_timeout = 3600s'
postconf -e 'tls_random_source = dev:/dev/urandom'

-=-

[falko]

postconf -e 'mydomain = example.com'
postconf -e 'myhostname = server1.$mydomain'
You must replace this with your own data.


postconf -e 'smtpd_sasl_local_domain ='
postconf -e 'smtpd_sasl_auth_enable = yes'
postconf -e 'smtpd_sasl_security_options = noanonymous'
postconf -e 'broken_sasl_auth_clients = yes'
postconf -e 'smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,check_ relay_domains'
postconf -e 'inet_interfaces = all'
postconf -e 'alias_maps = hash:/etc/aliases'
postconf -e 'smtpd_tls_auth_only = no'
postconf -e 'smtp_use_tls = yes'
postconf -e 'smtpd_use_tls = yes'
postconf -e 'smtp_tls_note_starttls_offer = yes'
postconf -e 'smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key'
postconf -e 'smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt'
postconf -e 'smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem'
postconf -e 'smtpd_tls_loglevel = 1'
postconf -e 'smtpd_tls_received_header = yes'
postconf -e 'smtpd_tls_session_cache_timeout = 3600s'
postconf -e 'tls_random_source = dev:/dev/urandom'
You can copy and paste this part. :)

[ct2193]

OK. Finally back to working on install.

I got through most of the Apache/PHP5 section and just before the Proftpd section, I'm doing the commands:

SuSEconfig
/etc/init.d/apache2 start

Restarting apache yields an error saying index.pl is either misspelled or refers to a module not installed.

Do I need to remove index.pl from the httpd.conf file, or am I missing a step?

The documentation said to comment out the line application/x-perl pl pm from the mime.types file.

[falko]

Restarting apache yields an error saying index.pl is either misspelled or refers to a module not installed.

What's the exact error message?
Anything in your Apache's error log?

[ct2193]

OK. I found remaining problems with the initial setup.

Now I'm into ISPconfig and having difficulties.

I got to the point of ./setup and it ran for a long time. Now I get a message about how it "stops here".

checking for working mmap... yes
checking for _LARGEFILE_SOURCE value needed for large files... 1
checking for fseeko... yes
checking whether snprintf correctly terminates long strings... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for zlib installation... /usr
configure: error: Please install zlib and zlib-devel packages
ERROR: Could not configure ClamAV
cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
./setup2: line 794: ispconfig_tmp/php/bin/php: No such file or directory
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!


I noticed something about zlib and ClamAV and such, but I don't really know why. i also see that "The PHP binary coming with ISPConfig does not work properly on your system!" As far as I know I followed the Suse 9.3 Perfect Setup all the way. Is this a problem with my initial setup, or has ISPconfig changed since the Perfect Setup documentation?

[falko]

checking for zlib installation... /usr
configure: error: Please install zlib and zlib-devel packages
ERROR: Could not configure ClamAV

You must install zlib and zlib-devel. Run yast and search for the appropriate packages.