PDA

View Full Version : FTP slow after move


happz
3rd July 2008, 02:54
Question. Any ideas why I get VERY slow FTP sessions and pretty much unable to upload or download via ftp client filezilla after i move and changed from cable modem to dsl modem? My sites come up fine and ispconfig seems okay but ftp to site and it take much longer to log in and my opens won't open for like 3 or 4 minutes when i click to open them. Try to delete and they won't delete....not sure what is going on. no apparent damage to the server from what i can see....

happz

falko
3rd July 2008, 18:32
Have you tried both active and passive transfers in your FTP client?
Any errors in your logs?

happz
4th July 2008, 02:51
Have you tried both active and passive transfers in your FTP client?
Any errors in your logs?

Can you give me the path to where i need to check. Also, i noticed that even logging into SSH (putty) it take about 10 seconds which didn't happen before either. plus now, i am unable to yum update or yum upgrade..you know to centos 5.2...anyway, i will look for response.
thanks Falko

happz
4th July 2008, 03:25
Jul 3 10:00:01 server2 proftpd[10481]: localhost.localdomain (localhost.localdomain[127.0.0.1]) - FTP session closed.
Jul 3 10:30:01 server2 proftpd[10927]: localhost.localdomain (localhost.localdomain[127.0.0.1]) - FTP session opened.
Jul 3 10:30:01 server2 proftpd[10927]: localhost.localdomain (localhost.localdomain[127.0.0.1]) - FTP session closed.
Jul 3 10:34:59 server2 /sbin/mingetty[3793]: tty1: invalid character 0x1b in login name
Jul 3 10:36:32 server2 kernel: e1000: eth0: e1000_watchdog_task: NIC Link is Down
Jul 3 10:36:36 server2 kernel: e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
Jul 3 11:00:01 server2 proftpd[11371]: localhost.localdomain (localhost.localdomain[127.0.0.1]) - FTP session opened.
Jul 3 11:00:01 server2 proftpd[11371]: localhost.localdomain (localhost.localdomain[127.0.0.1]) - FTP session closed.
Jul 3 11:30:01 server2 proftpd[11819]: localhost.localdomain (localhost.localdomain[127.0.0.1]) - FTP session opened.
Jul 3 11:30:01 server2 proftpd[11819]: localhost.localdomain (localhost.localdomain[127.0.0.1]) - FTP session closed.
Jul 3 12:00:01 server2 proftpd[12274]: localhost.localdomain (localhost.localdomain[127.0.0.1]) - FTP session opened.
Jul 3 12:00:01 server2 proftpd[12274]: localhost.localdomain (localhost.localdomain[127.0.0.1]) - FTP session closed.
Jul 3 12:30:01 server2 proftpd[12722]: localhost.localdomain (localhost.localdomain[127.0.0.1]) - FTP session opened.
Jul 3 12:30:01 server2 proftpd[12722]: localhost.localdomain (localhost.localdomain[127.0.0.1]) - FTP session closed.
Jul 3 13:00:01 server2 proftpd[13168]: localhost.localdomain (localhost.localdomain[127.0.0.1]) - FTP session opened.
Jul 3 13:00:01 server2 proftpd[13168]: localhost.localdomain (localhost.localdomain[127.0.0.1]) - FTP session closed.
Jul 3 13:30:01 server2 proftpd[13630]: localhost.localdomain (localhost.localdomain[127.0.0.1]) - FTP session opened.
Jul 3 13:30:01 server2 proftpd[13630]: localhost.localdomain (localhost.localdomain[127.0.0.1]) - FTP session closed.
Jul 3 14:00:01 server2 proftpd[14094]: localhost.localdomain (localhost.localdomain[127.0.0.1]) - FTP session opened.
Jul 3 14:00:01 server2 proftpd[14094]: localhost.localdomain (localhost.localdomain[127.0.0.1]) - FTP session closed.
Jul 3 14:30:01 server2 proftpd[14561]: localhost.localdomain (localhost.localdomain[127.0.0.1]) - FTP session opened.
Jul 3 14:30:01 server2 proftpd[14561]: localhost.localdomain (localhost.localdomain[127.0.0.1]) - FTP session closed.
Jul 3 15:00:01 server2 proftpd[15008]: localhost.localdomain (localhost.localdomain[127.0.0.1]) - FTP session opened.


NOt sure if this helps...but if you know what path i need to find the log you said you wanted to know about....thanks

happz
4th July 2008, 03:39
Falko i read another FTP area and you had them run this so i did...here is the results:

[root@server2 etc]# /etc/init.d/proftpd restart
Shutting down proftpd: [ OK ]
Starting proftpd: - warning: handling possibly truncated configuration data at line 64 of '/etc/proftpd.conf'
- setting default address to 127.0.0.1
[ OK ]
[root@server2 etc]#


anything from this guys....?

thanks.

happz

falko
4th July 2008, 17:39
You can switch to active/passive mode in your FTP client.
I think it could have something to do with your router's firewall. Are you using the same router as before?

happz
4th July 2008, 18:55
You can switch to active/passive mode in your FTP client.
I think it could have something to do with your router's firewall. Are you using the same router as before?

My equipment is the same but my ISP is not. I was using cable modem and now i'm using DSL and the config in my router is using PPPoE. Before the router had the static IP and now the dsl modem carries the static but hands control to the router. I have tried to change active/passive and there is some improvement but it is still not correct. I can browse around (but slow) and when i tried to upload files.....well, it just doesn't happen. As noted is that when i ssh in it takes much longer now to accept my password....after about 30 sec's it will log me in....

happz

happz
4th July 2008, 19:35
Falko...i just remembered i had another server with same config only different IP so i powered down the one in question and brought the other one up. i changed my port forwarding to the IP of the server that is now up and everything works. So I'm going to get a few updates for this server and then bring it down. when i get the server in question that is not working correct and now that we know it is not an ISP issue or router problem, where should i look. I have over 20 domains running from this server so i would like to get it working again. thanks Falko or anyone who can respond.

happz

Theophilus
5th July 2008, 10:59
It could be your new ISP is not providing reverse DNS properly. Try adding the IP address assigned to your DSL service to your /etc/hosts file on your server.

If it speeds the session up, this pinpoints the problem.

trexen
7th July 2008, 13:01
Do you have port 20 anf 21 open in youre FW for FTP ?

happz
11th July 2008, 03:24
I have 20, 21, 443, 80, and 81. Is there something else i need to port forward you think?

happz

trexen
11th July 2008, 09:40
20/21
25 smtp
465 smtps (secure)
993 imaps (secure)
995 pop3s (secure)
143 imap4
110 pop3
22 ssh (change to another port /etc/ssh/sshd_config) <-- Debian4 etch

Rgds
Marcus