new kernel 2.6.25.4 compiling slackware on vmware

[geetha_sg]

Hi,

I have installed slackware 12.1 on vmware server 1.0.1 with win xp. After that i did new kernel 2.6.24.5 compiling for vmware device drivers.

Here is my configs,

make mrproper
make menuconfig
make -j3 bzImage
make -j3 modules
make modules_install
cp System.map /boot/System.mapnew
cp .config /boot/confignew
cp /usr/src/linux/arch/i386/boot/bzImage /boot/vmlinuznew
mv /boot/vmlinuz /boot/vmlinuz-old


/etc/lilo.conf
vga=normal
lba32
compact

image = /boot/vmlinuznew
root = /dev/sda2
label = linux_2618
read-only

image = /boot/vmlinuz-old
root = /dev/sda2
label = linux_2433
read-only

/sbin/lilo -v

cd /boot
rm System.map
rm config
rm vmlinuz

Here is the list of lspci command:

00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 01)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 01)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 0
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 0
00:0f.0 VGA compatible controller: VMware Inc Abstract SVGA II Adapter
00:10.0 SCSI storage controller: BusLogic BT-946C (BA80C30) [MultiMaster 10] (rev 01)
00:11.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 10)

I have enabled
Device Drivers -> Network Device Support -> Ethernet (10 or 100 ) -> AMD (PCnet32 lance)

But problem is there is no modules lists on lsmod command

Please help me

regards
geeta

[falko]

But problem is there is no modules lists on lsmod command

Did you maybe compile the modules into the kernel statically?

[geetha_sg]

Thanks for your response. I have compiled the same kernel. I didnt get you "compiled the kernel statically"?

Regards
geetha

[geetha_sg]

Thanks for your response. I have compiled the same kernel. I didnt get you "compiled the kernel statically"?

Regards
geetha

Here is my kernel recompiling steps,

I have installed below kernel packages with slackware 12.1

kernel-headers-2.6.24.5-x86-2
kernel-huge-2.6.24.5-i486-2
kernel-huge-smp-2.6.24.5_smp-i686-2
kernel-modules-2.6.24.5-i486-2
kernel-source-2.6.24.5_smp-noarch-2

make mrproper
make menuconfig
make -j3 bzImage
make -j3 modules
make modules_install
cp System.map /boot/System.mapnew
cp .config /boot/confignew
cp /usr/src/linux/arch/i386/boot/bzImage /boot/vmlinuznew
mv /boot/vmlinuz /boot/vmlinuz-old


/etc/lilo.conf
vga=normal
lba32
compact

image = /boot/vmlinuznew
root = /dev/sda2
label = linux_new
read-only

image = /boot/vmlinuz-old
root = /dev/sda2
label = linux_old
read-only

/sbin/lilo -v

cd /boot
rm System.map
rm config
rm vmlinuz

[falko]

Can you post your kernel configuration file from the /boot directory?