Add new website: folders OK but still "shared IP" notice

[djkoelkast]

I reinstalled Debian 4.0 through the perfect setup yesterday, everything was fine, added about 26 websites, all fine.
But when I add another website now as admin but for one of my reseller accounts it does make the domain, it does make the /var/www/webXX/ folder but it still gives a shared IP when I type in the address, even after uploading files.

The site does *not* appear in /etc/apache2/vhosts/Vhosts_ispconfig.conf nor in one of the backup files. But before (the other 26 sites) it did...

This also appears when I add the site under Admin (just tested it).

When I restart Apache I get this:


server:~# /etc/init.d/apache2 restart
Forcing reload of web server (apache2)...[Mon Jul 02 16:22:06 2007] [warn] NameVirtualHost 192.168.1.75:80 has no VirtualHosts
[Mon Jul 02 16:22:16 2007] [warn] NameVirtualHost 192.168.1.75:80 has no VirtualHosts
.
server:~#


I already tried to comment out some of the virtual host things as in one of the howtos here on the site but it didn't help.
And now I cannot add any sites, or I have to manually edit the /etc/apache2/vhosts/Vhosts_ispconfig.conf-file every time...

Anybody any suggestions on this?

Thanks

[Hans]

Do you have the line:

Include /etc/apache2/vhosts/Vhosts_ispconfig.conf

At the very end within your apache2 configuration file which is /etc/apache2/apache2.conf ?

[djkoelkast]

Do you have the line:

Include /etc/apache2/vhosts/Vhosts_ispconfig.conf

At the very end within your apache2 configuration file which is /etc/apache2/apache2.conf ?

yes, the last line is (copy/paste from the actual file):

Include /etc/apache2/vhosts/Vhosts_ispconfig.conf

[djkoelkast]

I found out that everytime I make a new domain it will make a new file, like:

Vhosts_ispconfig.conf_02-07-07_22-02-29
Vhosts_ispconfig.conf_02-07-07_22-02-16
Vhosts_ispconfig.conf_02-07-07_22-02-02
Vhosts_ispconfig.conf_02-07-07_21-50-15

etc. and these do contain the updated versions!
I renamed the last one to Vhosts_ispconfig.conf and it does work, though the error is still there... (the [warn] thing)

[till]

Please have a look here:

http://www.howtoforge.com/forums/showthread.php?t=13596

[djkoelkast]

ok but I don't see a solution for my problem? I did rename it but next time it will give a new file with a new date again...

httpd -t gives:


server:~# httpd -t
[Tue Jul 03 10:16:29 2007] [warn] NameVirtualHost 192.168.1.75:80 has no VirtualHosts
Syntax OK

[Hans]

Is the IP-address 192.168.1.75 also mentioned within your file /etc/network/interfaces and within ISPConfig under Management > Server > Settings?

[djkoelkast]

Is the IP-address 192.168.1.75 also mentioned within your file /etc/network/interfaces and within ISPConfig under Management > Server > Settings?


# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
# allow-hotplug eth1
auto eth1
iface eth1 inet static
address 192.168.1.75
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.50


eth0 is the onboard 10/100 which I don't use, I do use eth1 which is a 1000mbit card.

It is also mentioned under management > server under IP address

[falko]

I hope your file looks rather like this:

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
# allow-hotplug eth1
auto eth1
iface eth1 inet static
address 192.168.1.75
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.50The leading spaces are important - they mean that the address, netmask, etc. settings still belong to eth1.

[djkoelkast]

actually no, the file was 1 on 1 copy/paste, there are no leading spaces or a tab, so I should add them I guess

Strange thing still is that the first 26 domains gave no problem ;)

Should I add some spaces or 1 tab before the lines?

[Hans]

You can use the tab, or use the spacebar as well.

[djkoelkast]

I did (see edited post) but it doesn't solve anything unfortunatly

[Hans]

Is ISPConfig writing a new vhost-file, if you change an item on the Basis-tab within the ISPConfig Manager or not?

[djkoelkast]

Latest file now: Vhosts_ispconfig.conf_03-07-07_09-33-25

Changed a site to enable CGI and changed the traffic MB by a little, saved it
and the latest file is now:

Vhosts_ispconfig.conf_03-07-07_16-18-40

So yes it does, first file was 69.096 in size, the new one 69.196 (which should be ok as I enabled CGI)

the Vhosts_ispconfig.conf remains unchanged...

[falko]

Please rename Vhosts_ispconfig.conf_03-07-07_16-18-40 to Vhosts_ispconfig.conf (back up the old one) and run httpd -t
What's the output?

[djkoelkast]

Please rename Vhosts_ispconfig.conf_03-07-07_16-18-40 to Vhosts_ispconfig.conf (back up the old one) and run httpd -t
What's the output?


server:~# httpd -t
[Wed Jul 04 15:15:29 2007] [warn] NameVirtualHost 192.168.1.75:80 has no VirtualHosts
Syntax OK
server:~#

[falko]

Hm... Can you post the output of
httpd -t
echo $??

[djkoelkast]

server:~# httpd -t
[Wed Jul 04 15:35:50 2007] [warn] NameVirtualHost 192.168.1.75:80 has no VirtualHosts
Syntax OK
server:~# echo $?
0
server:~#

[falko]

Hm, looks ok. And you really renamed Vhosts_ispconfig.conf_03-07-07_16-18-40 to Vhosts_ispconfig.conf before?

Any errors in /home/admispconfig/ispconfig/ispconfig.log? What's the output of ls -la /root/ispconfig?

[djkoelkast]

Hm, looks ok. And you really renamed Vhosts_ispconfig.conf_03-07-07_16-18-40 to Vhosts_ispconfig.conf before?

Any errors in /home/admispconfig/ispconfig/ispconfig.log? What's the output of ls -la /root/ispconfig?

I rename the last one to Vhosts_ispconfig.conf everytime because otherwise it won't do anything with my changes.

There are some WARN lines in ispconfig.log:


03.07.2007 - 20:42:19 => WARN - /root/ispconfig/scripts/lib/config.lib.php, Line 2418: WARNING: could not httpd -t &> /dev/null
03.07.2007 - 20:42:19 => WARN - /root/ispconfig/scripts/lib/config.lib.php, Line 2429: httpd syntax seems to contain errors, reloading with old configuration

03.07.2007 - 20:49:42 => WARN - /root/ispconfig/scripts/lib/config.lib.php, Line 2418: WARNING: could not httpd -t &> /dev/null
03.07.2007 - 20:49:42 => WARN - /root/ispconfig/scripts/lib/config.lib.php, Line 2429: httpd syntax seems to contain errors, reloading with old configuration


As they are all the same I won't post them all


server:~# ls -la /root/ispconfig
total 100
drwxr-xr-x 9 root root 4096 2007-07-04 18:48 .
drwxr-xr-x 9 root root 4096 2007-07-01 16:09 ..
-rwxr-xr-x 1 root root 34866 2007-07-01 16:10 cronolog
-rwxr-xr-x 1 root root 9673 2007-07-01 16:10 cronosplit
drwxr-xr-x 12 root root 4096 2007-07-01 15:55 httpd
drwxr-xr-x 15 root root 4096 2007-07-01 16:10 isp
-rw-r--r-- 1 root root 8 2007-07-04 18:48 .old_path_httpd_root
drwxr-xr-x 6 root root 4096 2007-07-01 15:53 openssl
drwxr-xr-x 6 root root 4096 2007-07-01 16:09 php
drwxr-xr-x 4 root root 4096 2007-07-01 16:10 scripts
drwxr-xr-x 4 root root 4096 2007-07-01 16:10 standard_cgis
drwxr-xr-x 2 root root 4096 2007-07-01 16:10 sv
-rwx------ 1 root root 9389 2007-07-01 16:10 uninstall
server:~#

[falko]

Vhosts_ispconfig.conf_03-07-07_16-18-40 contains some error (probably due to some missing Apache module like PHP), that's why it was renamed from Vhosts_ispconfig.conf to Vhosts_ispconfig.conf_03-07-07_16-18-40. At the same time the last working Vhosts_ispconfig.conf was restored so that Apache could continue to work.

Now I don't understand why it says "Syntax ok" when you rename Vhosts_ispconfig.conf_03-07-07_16-18-40 to Vhosts_ispconfig.conf... It should display some error instead... :confused: