Fedora Core 6 + Wide Screen Monitor (16:10)

[juan.villa]

Hey guys. I have a Hanns-G HW191D (WXGA+) monior capable of 1440*900 but I am having problem setting it to that resoultion in Fedora. When I installed FC6 it detected my monitor's refresh settings and all I had to do was tell FC I had a 1440*900 monitor and change the resolution to 1440*900. At first it seemed to work after I restarted X11, but I noticed things where a little stretched. When I checked he resolution again it had dropped down to 1280*1024. Below is my xorg.conf...


# Xorg configuration created by system-config-display

Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "Monitor"

### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor0"
ModelName "LCD Panel 1440x900"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 31.5 - 100.0
VertRefresh 59.0 - 75.0
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "i810"
# SETTINGS!
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection


Anyone have any idea? (I haven't tried removing all the modes from the xorg and leaving only 1440*900 because it makes no sense that it would work only that way... or does it?)

Thanks in advance!

[falko]

Anyone have any idea? (I haven't tried removing all the modes from the xorg and leaving only 1440*900 because it makes no sense that it would work only that way... or does it?)

I'd try that option.

[029terminate]

Try it with setting the

VertRefresh 59.0 - 60.0

Many Flatscreens can be run @ 75 Hz (or even higher), but it doesn't make
sense to set the refresh rate higher than 60 Hz, i think. Setting the refresh rate
to 60 Hz could solve the problem that you describe as "things where a little
stretched." I hope this will solve your problem,

cheers - 029