Creating An NFS-Like Standalone Storage Server With GlusterFS On Mandriva 2010.0

Want to support HowtoForge? Become a subscriber!
 
Submitted by falko (Contact Author) (Forums) on Thu, 2010-04-15 15:22. :: Mandriva | Storage

Creating An NFS-Like Standalone Storage Server With GlusterFS On Mandriva 2010.0

Version 1.0
Author: Falko Timme <ft [at] falkotimme [dot] com>
Follow me on Twitter
Last edited 03/15/2010

This tutorial shows how to set up a standalone storage server on Mandriva 2010.0. Instead of NFS, I will use GlusterFS here. The client system will be able to access the storage as if it was a local filesystem. GlusterFS is a clustered file-system capable of scaling to several peta-bytes. It aggregates various storage bricks over Infiniband RDMA or TCP/IP interconnect into one large parallel network file system. Storage bricks can be made of any commodity hardware such as x86_64 servers with SATA-II RAID and Infiniband HBA.

I do not issue any guarantee that this will work for you!

 

1 Preliminary Note

In this tutorial I use two systems, a server and a client:

  • server1.example.com: IP address 192.168.0.100 (server)
  • client1.example.com: IP address 192.168.0.101 (client)

Both systems should be able to resolve the other system's hostname. If this cannot be done through DNS, you should edit the /etc/hosts file so that it looks as follows on both systems:

vi /etc/hosts

127.0.0.1               localhost.localdomain localhost
192.168.0.100           server1.example.com server1
192.168.0.101           client1.example.com client1

(It is also possible to use IP addresses instead of hostnames in the following setup. If you prefer to use IP addresses, you don't have to care about whether the hostnames can be resolved or not.)

 

2 Setting Up The GlusterFS Server

server1.example.com:

GlusterFS is available as a package for Mandriva 2010.0, therefore we can install it as follows:

urpmi glusterfs-server

The command

glusterfs --version

should now show the GlusterFS version that you've just installed (2.0.6 in this case):

[root@server1 administrator]# glusterfs --version
glusterfs 2.0.6 built on Sep 20 2009 06:40:50
Repository revision: v2.0.6
Copyright (c) 2006-2009 Z RESEARCH Inc. <http://www.zresearch.com>
GlusterFS comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of GlusterFS under the terms of the GNU General Public License.
[root@server1 administrator]#

Next we create a few directories:

mkdir /data/
mkdir /data/export
mkdir /data/export-ns

Now we create the GlusterFS server configuration file /etc/glusterfs/glusterfsd.vol which defines which directory will be exported (/data/export) and what client is allowed to connect (192.168.0.101 = client1.example.com):

vi /etc/glusterfs/glusterfsd.vol

volume posix
  type storage/posix
  option directory /data/export
end-volume

volume locks
  type features/locks
  option mandatory-locks on
  subvolumes posix
end-volume

volume brick
  type performance/io-threads
  option thread-count 8
  subvolumes locks
end-volume

volume server
  type protocol/server
  option transport-type tcp
  option auth.addr.brick.allow 192.168.0.101 # Edit and add list of allowed clients comma separated IP addrs(names) here
  subvolumes brick
end-volume

Please note that it is possible to use wildcards for the IP addresses (like 192.168.*) and that you can specify multiple IP addresses separated by comma (e.g. 192.168.0.101,192.168.0.102).

Afterwards we restart the GlusterFS server:

/etc/init.d/glusterfsd restart


Please do not use the comment function to ask for help! If you need help, please use our forum.
Comments will be published after administrator approval.
Submitted by epretorious (registered user) on Wed, 2012-05-02 07:23.
CAUTION: Gluster configuration has changed since this article was written. The Refer to the Gluster Information Wiki for the current steps+commands to configure Gluster.