- Web Server
- Control Panels
- Site Map/RSS Feeds
HowtoForge provides user-friendly Linux tutorials about almost every topic.
If you've written a Linux tutorial that you'd like to share, you can contribute it. If you'd like to discuss Linux-related problems, you can use our forum. If you have questions, please contact us by email: info [at] howtoforge [dot] com or use our contact form.
Setting up a serial console
This tutorial will show you how to set up a serial console on a Linux system, and connect to it via a null modem cable. This is quite useful if your Linux server is in a headless configuration (no keyboard or monitor), as it allows you to easily get a console on the system if there are any problems with it (especially network problems, when SSH is not available). In the end, the GRUB menu will appear over the serial link, as will the bootup messages (output when booting the system). I'm using Debian Etch on the server and Ubuntu Edgy on my client, although this should work on any Linux distribution.
How to Set up Network Bonding in Ubuntu 6.10
Network Bonding, otherwise known as port trunking allows you to combine multiple network ports into a single group, effectively aggregating the bandwidth of multiple interfaces into a single connection. For example, you can aggregate two gigabyte ports into a two-gigabyte trunk port. Bonding is used primarily to provide network load balancing and fault tolerance.
Fight Image Spam With FuzzyOCR And SpamAssassin On Debian/Ubuntu
This tutorial describes how to scan emails for image spam with FuzzyOCR. FuzzyOCR is a plugin for SpamAssassin which is aimed at unsolicited bulk mail containing images as the main content carrier. Using different methods, it analyzes the content and properties of images to distinguish between normal mails (ham) and spam mails. FuzzyOCR tries to keep the system load low by scanning only mails that have not already been categorized as spam by SpamAssassin, thus avoiding unnecessary work.
Network-Attached Storage With FreeNAS
This tutorial shows how you can set up a network-attached storage server with FreeNAS. FreeNAS is based on the FreeBSD operating system and supports CIFS (samba), FTP, NFS, RSYNC, SSH, local user authentication, and software RAID (0, 1, 5). It comes with a powerful web interface and uses very little space on the hard drive - about 32MB.
Installing Ubuntu or Kubuntu, 6.06.1 LTS "Dapper Drake", on a Single/Multi -Boot RAID System
This guide describes how to install Ubuntu (Ubuntu+GNOME) or Kubuntu (Ubuntu+KDE) 6.06.1 LTS ("Dapper Drake") on a single or a multi -boot RAID system. It is meant as a variation of Ubuntu Wiki FakeRAID HowTo document, but digested and with minimum commentary. Its goal is to allow new Ubuntu users to complete an entire installation inside of 30 minutes, almost entirely by copy and paste.
Detailed Guide On Arrays In PHP
Here is yet another article of Fast PHP Articles Series. Today we are going to discuss ARRAYS. We will learn its syntax, its different types, the different built-in array functions that help to perform different tasks related to arrays quickly and different practical examples explaining the use of arrays in PHP.
How To Install KnowledgebasePublisher On Your Site
This is a step-by-step tutorial on installation of KnowledgebasePublisher, an opensource knowledge base, FAQ script that you can install on your web site.
VirtualBox On FC6 / CentOS 4 / OpenSuSE 10.2
InnoTek VirtualBox is a family of powerful x86 virtualization products for enterprise as well as home use. Not only is VirtualBox an extremely feature rich, high performance product for enterprise customers, it is also the only professional solution that is freely available as Open Source Software under the terms of the GNU Public License (GPL).
Install and Configure Auth Shadow on Debian/Ubuntu
Auth Shadow or mod-auth-shadow is a module for apache (and apache2, sort of) that enables authentication against /etc/shadow. The benefits being that any system user with a password can be authenticated for web_dav, subversion or simply an https server. The only other way to do this is with PAM. That method is dangerous because the apache user (www-data in my case) must be able to read /etc/shadow. Obviously, not a good idea. Auth Shadow accomplishes this safely by using a intermediate program called validate. This works because validate can be owned by root but executable by everyone. In the event that your server is compromised through apache, your password file will not be readable.
Resolving Domains Internally And Externally With Bind9 And Caching Nameserver
Some times, we are required to resolve our internal domains on a local nameserver and external (internet) domains on our ISP's nameserver. There are different solutions to this problem, but in this howto, we are going to solve it through configuring a combination of caching-nameserver and BIND 9.